Product Details

Usage

Manufactured Especially For Hard-To-Hold Liquids And Gases

Use With Copper, Brass, Aluminum And Welded Steel Hydraulic Tubing That Can Be Flared

Installation

Cut Tubing Squarely And Clean Tube End Thoroughly To Remove Burrs.

Place Nut Onto Tube. Place Threaded End Of Nut Toward End Of Tube.

Flare Tube End With Flaring Tool To Provide 45° Flare.

Clamp Tube Flare Between Nut And Nose Of Fitting Body By Screwing Nut On Finger-Tight. Tighten With A Wrench An Additional 1/4 Turn For Metal-To-Metal Seal.

Features

Economical Fitting Resists Mechanical Pullout

Easy To Disassemble And May Be Reassembled Repeatedly, For A Leak-Proof Connection

Construction

Manufactured from CA 360, CA 345 Or CA377 Brass

Safety Notes

The PSI Rating Given Is Based On A Temperature Of 73°F (23°C) Using Copper Tubing.

Temperature And Type Of Tubing Used Are Important Factors In Working Pressure Ranges.